Rohde & Schwarz MXO 4 Series - Page 410

Protocol analysisMXO 4 Series
410User Manual 1335.5337.02 ─ 07
Frame type
Selects the frame type that you want to display. You can filter all enabled frame types
simultaneously.
For each frame type, you can also specify conditions for the value of the fields in the
"Edit" dialog.
Remote command:
SBUS<sb>:SPMI:FILTer:FRAMe<fr>:ENABle on page 821
SBUS<sb>:SPMI:FILTer:FRENable on page 821
Edit
Opens a dialog to define the details of the selected frame.
"Field"
Enables the field type that you want to filter on for the selected frame.
The available fields are
Remote command:
SBUS<sb>:SPMI:FILTer:FIENable on page 821
SBUS<sb>:SPMI:FILTer:FRAMe<fr>:FLD<fl>:ENABle
on page 821
"Condition"
Displays the value condition for the selected field.
Remote command:
SBUS<sb>:SPMI:FILTer:BIT on page 818
SBUS<sb>:SPMI:FILTer:FRAMe<fr>:FLD<fl>:BIT
on page 818
SPMI (option R&S MXO4-K550)