Rohde & Schwarz MXO 4 Series - Page 523

Remote control commandsMXO 4 Series
523User Manual 1335.5337.02 ─ 07
Manual operation: See "Predefined probe, name and type of the probe"
on page 126
PROBe<ch>:SETup:ATTenuation:UNIT <Unit>
Returns the unit of the connected probe if the probe is detected or predefined. For
unknown probes, you can select the required unit.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Parameters:
<Unit> V | A | W
Voltage probe (V), current probe (A), power probe (W)
*RST: V
Usage: Asynchronous command
Manual operation: See "Vertical unit" on page 127
PROBe<ch>:SETup:BANDwidth?
Returns the bandwidth of the connected probe.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Return values:
<Bandwidth> Range: 10000 to 20000000000
Increment: 10
*RST: 1500000000
Default unit: Hz
Usage: Query only
Asynchronous command
Manual operation: See "Probe bandwidth" on page 127
PROBe<ch>:SETup:OFFSet:TOMean
Compensates automatically for a DC component of the input signal using the result of
a background mean measurement.
Suffix:
<ch>
.
1 to 4, index of the analog channel
Usage: Event
Asynchronous command
Manual operation: See "Set offset to mean" on page 127
Acquisition and setup