Rohde & Schwarz MXO 4 Series - Page 584

Remote control commandsMXO 4 Series
584User Manual 1335.5337.02 ─ 07
Example:
CALCulate:MATH3:LABel 'M3AddC1C2'
Usage: Asynchronous command
Manual operation: See "Label" on page 184
CALCulate:MATH<m>:VERTical:SCALe[:VALue] <VerticalScale>
Sets the scale of the y-axis in the math function diagram. The value is defined as
"<unit> per division", e.g. 50 mV/div. In this case, the horizontal grid lines are displayed
in intervals of 50 mV.
Suffix:
<m>
.
1...5, index of the math waveform
Parameters:
<VerticalScale> Range: 1E-12 to 100E+12
Increment: 1E-05
*RST: 0.5
Default unit: V
Usage: Asynchronous command
Manual operation: See "[Scale]" on page 43
CALCulate:MATH<m>:UNIT <UserUnit>
Sets a user-defined unit for the math operation.
Suffix:
<m>
.
1...5, index of the math waveform
Parameters:
<UserUnit> String with the base unit
Example:
CALCulate:MATH:UNIT 'A'
Usage: Asynchronous command
Manual operation: See "Unit" on page 191
CALCulate:MATH<m>:VERTical:OFFSet <VerticalOffset>
Sets a voltage offset to adjust the vertical position of the math function on the screen.
Negative values move the waveform up, positive values move it down.
Suffix:
<m>
.
1...5, index of the math waveform
Parameters:
<VerticalOffset> Range: -100E12 to 100E12
Increment: 0.01
*RST: 0
Default unit: div
Waveform analysis