Rohde & Schwarz MXO 4 Series - Page 677

Remote control commandsMXO 4 Series
677User Manual 1335.5337.02 ─ 07
Suffix:
<m>
.
1...3, index of the power analysis measurement
Parameters:
<Type> QUALity | HARMonics
Example:
POW1:TYPE QUAL
Sets the 1st power analysis measurement to quality.
Usage: Asynchronous command
Manual operation: See "Add" on page 273
POWer<m>:ASKew[:EXECute]
Performs auto deskew adjustment.
Suffix:
<m>
.
Irrelevant, omit the suffix.
Usage: Event
Asynchronous command
Manual operation: See "Auto Deskew" on page 287
EXPort:RESult:SELect:POWer<m> <ExportResults>
If enabled, includes the results of selected power analysis measurement in the results
export file.
Suffix:
<m>
.
1...3, index of the power analysis measurement
Parameters:
<ExportResults> ON | OFF
*RST: OFF
Usage: Asynchronous command
17.15.2.2 Power quality
Power quality setup
POWer<m>:QUALity:SOURce:CURRent..........................................................................677
POWer<m>:QUALity:SOURce[:VOLTage].........................................................................678
POWer<m>:QUALity:FREQuency[:VALue]........................................................................678
POWer<m>:QUALity:FREQuency:USER..........................................................................678
POWer<m>:QUALity:SOURce:CURRent <CurrentSource>
Sets the channel for the current source input of the power quality analysis.
Applications