Rohde & Schwarz MXO 4 Series - Page 765

Remote control commandsMXO 4 Series
765User Manual 1335.5337.02 ─ 07
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Hysteresis>
Usage: Asynchronous command
Manual operation: See "Threshold" on page 372
SBUS<sb>:CAN:SIC:THReshold <SIC Threshold>
Sets a threshold value for the SIC transceiver mode.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<SIC Threshold>
Usage: Asynchronous command
Manual operation: See "Threshold" on page 372
SBUS<sb>:CAN:FAST:THReshold <SIC Threshold>
Sets a threshold value for the fast transceiver mode.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<SIC Threshold>
Usage: Asynchronous command
Manual operation: See "Threshold" on page 372
SBUS<sb>:CAN:FAST:HYSTeresis <Hysteresis>
Sets a hysteresis value for the fast transceiver mode.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Hysteresis>
Usage: Asynchronous command
Manual operation: See "Threshold" on page 372
SBUS<sb>:CAN:XDATa:DBITrate <XLBitrate>
Sets the bit rate of the data phase for the CAN XL frame.
Protocols