Rohde & Schwarz MXO 4 Series - Page 766

Remote control commandsMXO 4 Series
766User Manual 1335.5337.02 ─ 07
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<XLBitrate> Range: 10000 to 15000000
Increment: 100
*RST: 10000000
Default unit: bps
Usage: Asynchronous command
Manual operation: See "XL bit rate" on page 371
SBUS<sb>:CAN:XDATa:SAMPlepoint
<XLSamplePoint>
Sets the position of the sample point within the bit in percent of the nominal bit time for
the CAN XL frame.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<XLSamplePoint> Range: 30 to 90
Increment: 5
*RST: 66
Default unit: %
Usage: Asynchronous command
Manual operation: See "XL sample point" on page 371
SBUS<sb>:CAN:TRCVmode <TransceiverMd>
Selects the transceiver mode for the CAN decoding.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<TransceiverMd> SIC | FAST
*RST: SIC
Usage: Asynchronous command
Manual operation: See "Transceiver mode" on page 370
SBUS<sb>:CAN:SYMBols <ShowSymbols>
Activates the symbol list to be used for decoding.
Suffix:
<sb>
.
1...4, index of the serial bus
Protocols