Protocol analysisMXO 4 Series
371User Manual 1335.5337.02 ─ 07
FD bit rate
Sets the number of transmitted bits per second for the CAN FD frame.
Remote command:
SBUS<sb>:CAN:FDATa:DBITrate on page 764
FD sample point
Sets the position of the sample point within the bit in percent of the nominal bit time for
the CAN FD frame.
Remote command:
SBUS<sb>:CAN:FDATa:SAMPlepoint on page 764
XL bit rate
Sets the number of transmitted bits per second for the CAN XL frame.
Remote command:
SBUS<sb>:CAN:XDATa:DBITrate on page 765
XL sample point
Sets the position of the sample point within the bit in percent of the nominal bit time for
the CAN XL frame.
Remote command:
SBUS<sb>:CAN:XDATa:SAMPlepoint on page 766
13.5.1.2 Threshold settings
Access: [Apps] key > "Protocol" tab > "CAN" > "Thresholds".
CAN (option R&S MXO4-K520)
To Next Page
Loading...
