Rohde & Schwarz MXO 4 Series - Page 829

Remote control commandsMXO 4 Series
829User Manual 1335.5337.02 ─ 07
SBUS<sb>:TNOS:SYMBols <ShowSymbols>
Activates the symbol list to be used for decoding.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<ShowSymbols> ON | OFF
*RST: OFF
Usage: Asynchronous command
SBUS<sb>:TNOS:THReshold:LOWer
<Lower Thres>
Sets a lower threshold.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Lower Thres>
Usage: Asynchronous command
Manual operation: See "Threshold" on page 415
SBUS<sb>:TNOS:THReshold:UPPer <Upper Thres>
Sets an upper threshold.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Upper Thres>
Usage: Asynchronous command
Manual operation: See "Threshold" on page 415
SBUS<sb>:TNOS:NEWList <FileName>
Loads a symbol list file.
Suffix:
<sb>
.
1...4, index of the serial bus
Setting parameters:
<FileName> String parameter with path and file name.
Example:
SBUS1:TNOS:NEWList
'/home/storage/userData/Protocol/TNOS.csv'
SBUS1:TNOS:SYMBols ON
Protocols