Rohde & Schwarz MXO 4 Series - Page 858

Remote control commandsMXO 4 Series
858User Manual 1335.5337.02 ─ 07
Suffix:
<wg>
.
1...2, index of the waveform generator
Parameters:
<Frequency> Range: 0.001 to 100000000
Increment: 0.001
*RST: 10000000
Default unit: Hz
Usage: Asynchronous command
Manual operation: See "Frequency" on page 436
WGENerator<wg>:FUNCtion:PULSe[:WIDTh]
<PulseWidth>
Sets the pulse width, the pulse duration of the generated pulse waveform.
Suffix:
<wg>
.
1...2, index of the waveform generator
Parameters:
<PulseWidth> Range: 1.65E-08 to 90000
Increment: 1
*RST: 5E-07
Default unit: s
Usage: Asynchronous command
Manual operation: See "Pulse width" on page 438
WGENerator<wg>:FUNCtion:RAMP[:SYMMetry] <RampSymmetry>
Sets the symmetry of a ramp waveform, the percentage of time the waveform is rising.
By changing the symmetry of the ramp, you can create, for example, triangular wave-
forms.
Suffix:
<wg>
.
1...2, index of the waveform generator
Parameters:
<RampSymmetry> Range: 0 to 100
Increment: 1
*RST: 50
Default unit: %
Usage: Asynchronous command
Manual operation: See "Symmetry" on page 437
WGENerator<wg>:FUNCtion[:SELect] <FunctionType>
Selects the type of waveform to be generated.
Waveform generator (option R&S
MXO4-B6)