Rohde & Schwarz SMU200A - Page 248

Instrument Function
R&S
®
SMU200A
228Operating Manual 1007.9845.32 ─ 15
Mode - User Correction
Selects if user correction lists should be imported or exported. The settings offered
depend on the selected mode.
SCPI command:
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 705
Extension - User Correction
Selects the file extension of the ASCII file to be imported or exported. Selection TXT (text
file) or CSV (Excel file) is available.
SCPI command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension on page 703
Decimal Point - User Correction
Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
SCPI command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
on page 704
Column Separator- User Correction
Selects the separator between the frequency and level column of the ASCII table the user
correction list is exported to or imported from.
SCPI command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 704
Select ASCII Source / Destination - User Correction
Calls the "File Manager" for selecting the ASCII file to be imported into a user correction
list (source) or the ASCII file the user correction list is exported (destination) in.
SCPI command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect on page 703
RF Signal and Analog Modulations - RF Block