Patient data
Operator Manual
18
of 60 SPR2-310.620.30.02.02
Patient data
Configuration of Patient Registration 0
You can adapt patient registration flexibly to the individual requirements of your
examination practice.
You can change the following default settings:
❏ The entries in the selection lists of the Patient Registration window.
❏ Selection of the databases that you want to be searched when using the
search function as well as the search procedure and display of the search re-
sults.
❏ Worklist settings, if a HIS/RIS system is connected.
Calling up the configuration window 0
You can call up the configuration window from the syngo Configuration panel.
◆ Select Options > Configuration in the main menu.
◆ Double-click on the Patient Registration icon.
–The Registration Configuration window is displayed with the
Entering Data, Searching, and HIS/RIS cards.
The HIS/RIS card is displayed only if your system is connected to a hospital or
radiology information system and configured and licensed accordingly.
To Next Page
Loading...
Need help?
General
