Image Processing
ARCADIS Varic
SPR2-310.620.30.02.02 65
of 78
Sending images (DICOM option) 0
If your system is connected to a network, you can send patient and examination
data to other workstations via the network using the Send to.... function.
For images of a subtraction or Roadmap study, you can select whether you want
to send native images or only the subtracted images.
Send images to node 1 â—† Select the data that you want to send.
â—† Select Transfer > Send to Node 1.
– The data are sent to the selected address.
Sending images to a
specific network
address
â—† Select Transfer > Send to....
â—† Select the required network address(es) in the Send To dialog box.
â—† Click Send.
– The selected data are sent to the required address(es).
To Next Page
Loading...
Need help?
General
