Operator Manual
38
of 52 SPR2-310.620.30.02.02
Examination
Opening a report 0
For the current patient â—† Select Reporting > Open Report in the Viewing task card.
– The report for the current patient is opened.
If several reports exist for the patient loaded in the Viewing task card, a dialog
box is displayed in which you select the required report.
For another patient â—† Double-click the required report in the content area of the Patient Browser.
Or
â—† Select the report in the Patient Browser.
â—† Select Reporting > Open Report or click the relevant button in the tool bar
of the Patient Browser.
– The selected report is opened.
Editing a report 0
Apart from the work and verification status, no changes are required in the
Radiation Summary Report. The other entries can therefore not be edited.
Setting the status The status for the postprocessing report is set according to the work progress.
A report with the "verified" status can be printed out for documentation purposes.
â—† Select the relevant work status/verification status in the selection lists in the
status area.
â—† Click Apply.
To Next Page
Loading...
Need help?
General
