Introduction
ARCADIS Varic
SPR2-310.620.30.02.02 5
of 8
Training 0
It is recommended that operating personnel undergo application training prior to
using the system. This training can be conducted by Siemens employees.
Conditions of use 0
The digital X-ray system ARCADIS Varic is a mobile system suitable for use in
an OR. When using the system, the applicable country-specific requirements
must be observed.
Maintenance, cleaning, and disinfection 0
See → Register 10: Maintenance.
Essential performance characteristics 0
See → Register 9: Technical Data.
Frequently used operating functions 0
❏ System On/Off
❏ Patient registration
❏ Selecting the operating mode
❏ Recording X-ray images
❏ Processing X-ray images (post-processing/adding comments)
❏ Saving/archiving studies locally or to a PACS
Operating functions regarding safety 0
❏ Emergency stop function (emergency stop switch)
❏ Radiation protection (collimator function)
❏ Moving the C-arm
To Next Page
Loading...
