Patient data
ARCADIS Varic
SPR2-310.620.30.02.02 41
of 60
Changing the work status 0
The work status indicates the processing stage of patient and examination data.
This status is indicated as an abbreviation in every list entry in the content area.
With the exception of "read" and "verified", all work statuses are automatically set
by the system.
After storing or transferring data, always check whether the process was carried
out correctly - irrespective of the work status display.
Under Transfer Configuration you can specify that data must have reached a cer-
tain work status before they can be archived and sent.
Entering the status
manually
As the user you can set the following entries for studies and series in your local
database:
❏ com/... Completed
❏ ver/... QA Verified
❏ rea/... Read
◆ Select Edit > Set State and select the work status you want to assign.
Or
◆ Click the appropriate button on the tool bar.
– The work status of the selected data objects is changed correspondingly.
To Next Page
Loading...
Need help?
General
