Operator Manual
18
of 98 SPR2-310.620.30.02.02
Documentation
Selecting a film job If you have loaded several patients into the Filming task card, you can select the
task you want to expose from the list displayed in the Select Film Job dialog box.
◆ Select Patient > Expose Film Task.
–The Select Film Job dialog box is opened.
◆ Select a job.
◆ Click Expose.
Correcting the film size 0
If the film size set for the film sheet waiting to be exposed/printed is not support-
ed by the selected camera, the Incorrect Film Size dialog box is displayed.
Selecting a different
size
◆ Select the film size configured for the camera/printer from the selection list.
◆ Confirm with OK.
– Filming/printing is resumed.
To Next Page
Loading...
