Siemens ARCADIS Varic Operator's Manual

Image Processing
ARCADIS Varic
SPR2-310.620.30.02.02 29
of 78
Selecting direct image processing 0
Direct image processing (implicit selection) with the mouse is automatically
applied to the image segment on which the mouse cursor is located.
Setting the input focus ◆ Place the mouse cursor on an image which is not selected and edit the image,
for example, by windowing.
– The input focus is placed on this image.
If graphics were previously explicitly selected in the input focus, they remain
explicitly selected.

Siemens ARCADIS Varic Specifications

General

Type	Mobile C-arm
Image Intensifier	9-inch or 12-inch
DICOM Compatibility	Yes
Frame Rate	Up to 30 fps
Focal Spot Size	0.3/0.6 mm
Monitor	Dual 18-inch TFT LCD monitors