Operator Manual
66
of 78 SPR2-310.620.30.02.02
Image Processing
Filming Images 0
You can also use the Viewing task card to select images and copy them to
Filming (DICOM option).
Make sure the printer is switched on before you send images to print.
Transferring images to
Filming
â—† Select the images in the image area of the Viewing task card.
â—† Select Patient > Copy to Film Sheet.
–or–
â—† Click this button.
– All the selected images are transferred to the "virtual film sheet" (Filming
task card or Film Preview window). There you activate the Auto Expose
option, and the images are exposed on film or printed on paper as soon as
the film sheet has been filled, or they are first collected in a film job.
Exposing images on
film
Patient images that you have collected in a film job can be printed or exposed
from the Viewing task card. To do that, you do not need to switch to the Filming
task card.
â—† Select Patient > Expose Film Task.
– All images of the film job are transferred to the camera.
To Next Page
Loading...
Need help?
General
