Siemens ARCADIS Varic - Defining Print Settings

Examination
ARCADIS Varic
SPR2-310.620.30.02.02 49
of 52
Defining print settings 0
On the Options card, you can define print settings for the reports.
◆ Click the Options card into the foreground.
– The card has three subcards that you can access using the tab at the left-
hand edge.
Defining default print
settings
◆ Click the General subcard into the foreground.
◆ Select the required printer from the Default printer selection list.
◆ Select the required paper size from the Default papersize selection list.
The default print settings on the General subcard are valid for the LithoReport
and the Radiation Summary Report.