EasyManua.ls Logo

Siemens ARCADIS Varic - Electromagnetic Compatibility; Equipotential Bonding; Maintenance and Inspection; Use in Connection with High Frequency

Siemens ARCADIS Varic
476 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
ARCADIS Varic
SPR2-310.620.30.02.02 5
of 28
Equipotential bonding 0
Products for which equipotential bonding is required may only be operated in
medical facilities where supplementary equipotential bonding has been installed
and tested according to DIN VDE 0107/10.94 Section 4 for Germany or the rele-
vant country-specific regulations.
Electromagnetic compatibility 0
This medical device complies with the requirements of the applicable standard
on electromagnetic compatibility (EMC).
( see "Notes regarding electromagnetic compatibility (EMC)" in the Operator
Manual)
However, we wish to inform you that other mobile electronic devices such as
radio telephones (mobile phones) exceed the radiation limits specified in
the EMC standard and can therefore disturb functions of your medical device.
Use in connection with high frequency 0
The following regulations for use must be observed:
IEC/TR 1289-1/07.94/
High-frequency surgical equipment - Part 1: Operation
IEC/TR 1289-2/08.94/
High-frequency surgical equipment - Part 2: Maintenance
Maintenance and inspection 0
Before using the equipment for examination, the user must ascertain that all safe-
ty-relevant devices function properly and that the system is ready for operation.

Table of Contents

Other manuals for Siemens ARCADIS Varic

Related product manuals