Image Processing
ARCADIS Varic
SPR2-310.620.30.02.02 25
of 78
Selecting images 0
On the Viewing task card, you can not only view images, but also process and
evaluate them.
Selection possibilities There are two different ways of selecting images for processing:
❏ explicitly holding the Ctrl key down (explicitly selected images are shown with
a continuous border)
❏ implicitly by working in the input focus
Working in the input focus 0
The Input Focus shows the active segment of the image area. It is marked by a
broken line border, i.e. it is selected implicitly.
Default input focus When you load images onto the Viewing task card, the input focus is in the
default position in the top left segment of the image area.
To Next Page
Loading...
Need help?
General
