Documentation
ARCADIS Varic
SPR2-310.620.30.02.02 13
of 98
Virtual film sheet full 0
In general, every time you transfer images of a series or whole studies of a
patient to the virtual film sheet, a film job is created.
No more than 3 film jobs at a time can be managed in the virtual film sheet.
If a fourth film job is transferred to the film sheet, the No More Film Jobs
Available dialog box appears.
This situation can usually only occur if the Automatic Exposure option is deacti-
vated for the film jobs as recommended. The film jobs then remain in the virtual
film sheet until you send them to filming manually and thus complete them.
You must first expose/print or delete one of the film jobs in the queue before a
new film job can be accepted.
To Next Page
Loading...
