Siemens ARCADIS Varic - Sending Data to a Standard Address; Sending Patient Data in the Network (Option)

Documentation
ARCADIS Varic
SPR2-310.620.30.02.02 73
of 98
Sending patient data in the network (option) 0
If your system is connected to and configured in a network, you can select patient
and examination data from your local database and send them to other users in
your DICOM network whenever necessary.
Sending data to a standard address 0
During installation, Siemens Service can configure various network nodes
(e.g. Node 1 and Node 2) as standard addresses in the network.
◆ Select the data that you want to send.
◆ Press the Send to Node 1 key on the symbol keypad.
Or
◆ Call up Transfer > Send to Node 1 or Transfer > Send to Node 2.
—or—
◆ Click the relevant button.
– The data are sent to the selected address.