Siemens ARCADIS Varic Operator's Manual

Documentation
ARCADIS Varic
SPR2-310.620.30.02.02 33
of 98
Changing film settings for a film job 0
When your system is configured, a standard film layout is defined. This layout
contains all the settings required for filming.
If these presettings are not suitable, you can change the following on the Filming
task card or in the Film Preview dialog:
❏ Select another camera or printer
❏ Change the number of copies
❏ Change the layout of the film sheets
❏ Change the image, text and graphic display

Siemens ARCADIS Varic Specifications

General

Type	Mobile C-arm
Image Intensifier	9-inch or 12-inch
DICOM Compatibility	Yes
Frame Rate	Up to 30 fps
Focal Spot Size	0.3/0.6 mm
Monitor	Dual 18-inch TFT LCD monitors