Operator Manual
36
of 78 SPR2-310.620.30.02.02
Image Processing
Windowing with the keyboard 0
For fine adjustment of the window values, you can also use the keys on the sym-
bol keypad of the keyboard.
Pay attention to the current scope.
Setting the contrast
â—† Press the Width- or Width+ button.
– The contrast is reduced or increased in small steps.
Or
â—† Keep the Width- or Width+ button pressed.
– The contrast is reduced or increased in larger steps.
Setting the brightness
â—† Press the Center- or Center+ button.
– The brightness is reduced or increased in small steps.
Or
â—† Keep the Center- or Center+ button pressed.
– The brightness is reduced or increased in larger steps.
Restoring window values 0
â—† Select Image > Reset Window.
– The selected image(s) is/are displayed with their original window values.
To Next Page
Loading...
Need help?
General
