Safety
ARCADIS Varic
SPR2-310.620.30.02.02 7
of 28
Malfunctions 0
In the event of malfunctions of the ARCADIS Varic system, please call SIEMENS
Customer Service.
Error messages at the C-arm system 0
When a malfunction is detected, the ARCADIS Varic system is disabled. An error
message is displayed on the control panel of the C-arm system:
In addition, a malfunction is also displayed on the left monitor.
❏ All vital system functions are automatically checked each time the
ARCADIS Varic is switched on.
❏ During routine operation, the ARCADIS Varic is continuously monitored.
❏ Temporary error messages, such as No. 5901, can be canceled by pressing
any button on the C-arm system (except vertical up/down movement but-
tons).
❏ Non-temporary error messages, such as No. 5015 or 5016, cannot be can-
celed. If these errors occur, radiation release is no longer possible.
Please notify Customer Service immediately.
Error messages 7309 (tube unit iris diaphragm), 7009 (slot diaphragm) and 7409
(TV camera iris) are temporary error messages that can lead to unnecessary
radiation exposure of the user and patient if treatment is continued.
If errors occur repeatedly, switch off the ARCADIS Varic and notify Customer
Service. Prior to that, save the log file with the recorded system activities
(Menu Options > Save Log, → Page 9). Additionally, write down the following
information:
❏ Error number and time when error occurred.
❏ Operating mode selected.
❏ Was radiation activated when the error occurred?
❏ Is the error related to an operating process?
If there are any malfunctions/failure of the radiation indicators, please contact
Siemens Customer Service.
To Next Page
Loading...
Need help?
General
