Documentation
ARCADIS Varic
SPR2-310.620.30.02.02 57
of 98
Selecting the image
arrangement
◆ Activate the vertical option.
– The images are arranged on the film sheet one after the other from top to
bottom.
Or
◆ Activate the horizontal option.
– The images are arranged one after the other from left to right.
Creating series with
copy on film sheet
When transferring a series to the virtual film sheet, you can have a copy generat-
ed automatically and then process the copy before filming or printing.
◆ Click the Copy series option.
– Copies of the series are generated.
◆ Activate the Interleaved option.
– The copied series is inserted.
Or
◆ Activate the Appended option.
– The copied series is appended to the end.
Selecting the display ◆ Activate the Keep visible part option.
– The image is displayed in the segment with maximum size, without being
cropped. This is the default.
Or
◆ Activate the Original Image option.
– The image is displayed in its original size. Depending on the original size,
the image might be cropped or displayed too small in the segment.
Or
◆ Activate the Clip document option.
– The image is enlarged so that it fills the entire segment. The overlapping
edges are cropped accordingly.
To Next Page
Loading...
