Siemens SINAMICS G120 - Page 746

Index
C-746
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 / Control Units CU240B/E-2 Parameter Manual (LH11), 01/2011
Function diagrams Overview
Internal control/status words, data sets,
2-500
Monitoring functions, faults, alarms, 2-505
PROFIdrive/PROFIBUS, 2-499
Setpoint channel, 2-501
Vector control, current control, 2-504
Vector control, speed control and genera-
tion of the torque limits, 2-503
Vector control, V/f control, 2-502
Function diagrams PROFIdrive
PROFIBUS, addresses and diagnostics,
2-526
PZD receive signals interconnection,
2-528
PZD send signals interconnection, 2-532
Receive telegram, free interconnection via
BICO (p0922 = 999), 2-536
Send telegram, free interconnetion via
BICO (p0922 = 999), 2-537
Status words, free interconnection, 2-538
STW1 control word interconnection,
2-529
STW1 control word interconnection
(p2038 = 0), 2-530
STW3 control word interconnection
(p2038 = 0), 2-531
Telegrams and Process Data (PZD),
2-527
ZSW1 status word interconnection
(p2038 = 0), 2-534, 2-535
ZSW1 status word interconnection
(p2038 = 2), 2-533
Function diagrams Safety Integrated
Basic Functions, F-DI Fail-safe Digital In-
put, 2-564
Basic Functions, Monitoring functions and
faults/alarms, 2-561
Basic Functions, Parameter Manager,
2-560
Basic Functions, Status words, 2-562
Basic Functions, STO Safe Torque Off,
2-563
SI Motion, Parameter Manager, 2-569
SI Motion, PROFIsafe Control word and
Status word, 2-568
SI Motion, Safe State selection, 2-571
SI Motion, SLS Safely-Limited Speed,
2-565
SI Motion, Status words, 2-567
SI Motion, Fail-safe Digital Inputs (F-
DI0 ... F-DI2), 2-570
SI Motion, SS1 Safe Stop 1,
Internal STOP A, B, F, 2-566
Function diagrams Setpoint channel
Basic ramp-function generator, 2-579
Direction limitation and direction reversal,
2-577
Extended ramp-function generator, 2-580
Fixed speed setpoints, binary selection
(p1016 = 2), 2-573
Fixed speed setpoints, direct selection
(p1016 = 1), 2-574
Main/supplementary setpoint, setpoint
scaling, jogging, 2-576
Motorized potentiometer, 2-575
Ramp-function generator selection, status
word, tracking, 2-581
Skip frequency bands and frequency limi-
tations, 2-578
Function diagrams Signals and monitoring
functions
Load monitoring, 2-638
Monitoring functions 1, 2-642
Monitoring functions 2, 2-643
Speed signals 1, 2-635
Speed signals 2, 2-636
Thermal I2t motor model
(PEM, p0300 = 2xx), 2-641
Thermal monitoring, motor, 2-640
Thermal monitoring, power module, 2-639
Torque signals, motor locked/stalled,
2-637