Agilent Technologies N5171B User Manual

Agilent X-Series Signal Generators SCPI Command Reference 109
System Commands
Display Subsystem (:DISPlay)
:ANNotation:CLOCk:DATE:FORMat
Supported All Models
:DISPlay:ANNotation:CLOCk:DATE:FORMat MDY|DMY
:DISPlay:ANNotation:CLOCk:DATE:FORMat?
This command enables the selection of the date format. The choices are month–day–year (MDY) or
day–month–year (DMY) format.
Remarks The setting enabled by this command is not affected by signal generator power–on,
preset, or *RST.
:ANNotation:CLOCk[:STATe]
Supported All Models
:DISPlay:ANNotation:CLOCk[:STATe] ON|OFF|1|0
:DISPlay:ANNotation:CLOCk[:STATe]?
This command enables or disables the digital clock view in the lower right side of the front- panel
display.
Remarks The setting enabled by this command is not affected by signal generator power–on,
preset, or *RST.
:BRIGhtness
Supported All Models
:DISPlay:BRIGhtness <value>
:DISPlay:BRIGhtness?
This command sets the display brightness (intensity). The brightness can be set to the minimum level
(0.02), maximum level (1), or in between by using fractional numeric values (0.03–0.99).
Range 0.02 to 1
Key Entry Brightness
Remarks The setting enabled by this command is not affected by signal generator power–on,
preset, or *RST.
:CAPTure
Supported All Models
:DISPlay:CAPTure
This event command enables the user to capture the current display and store it in the signal
generator’s memory.

Agilent Technologies N5171B Specifications

General

Brand	Agilent Technologies
Model	N5171B
Category	Computer Hardware
Language	English