Agilent Technologies N5171B

378 Agilent X-Series Signal Generators SCPI Command Reference
Real–Time Commands
AWGN Real–Time Subsystem–Option 403 ([:SOURce]:RADio:AWGN:RT)
[:SOURce]:RADio:AWGN:RT:RATio <value>
[:SOURce]:RADio:AWGN:RT:RATio?
This command sets the amount of channel bandwidth compared to the amount of flat bandwidth.
The variable <value> is expressed in units of Hertz (Hz–MHz).
*RST 1.0
Key Entry Bandwidth Ratio
[:STATe]
Supported N5172B/82B with Option 403
[:SOURce]:RADio:AWGN:RT[:STATe] ON|OFF|1|0
[:SOURce]:RADio:AWGN:RT[:STATe]?
This command enables or disables the operating state of real–time AWGN.
*RST 0
Key Entry Real-Time AWGN Off On