118 Agilent X-Series Signal Generators SCPI Command Reference
System Commands
Memory Subsystem (:MEMory)
Key Entry DMOD
Remarks Refer to “File Name Variables” on page 13 for information on the file name syntax.
:CATalog:FIR
Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:FIR?
This command outputs a list of the finite impulse response filter (FIR) files. The return data will be
in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name,file type,file size>"
Key Entry FIR
Remarks Refer to “File Name Variables” on page 13 for information on the file name syntax.
:CATalog:FSK?
Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:FSK?
This command outputs a list of the frequency shift keying (FSK) files. The return data will be in the
following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name,file type,file size>"
Key Entry FSK
Remarks Refer to “File Name Variables” on page 13 for information on the file name syntax.
:CATalog:IQ?
Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:IQ?
This query outputs a list of the Inphase and Quadrature (I/Q) files. The return data will be in the
following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name>,<file type>,<file size>"
Key Entry I/Q
To Next Page
Loading...
Need help?
General
