Agilent X-Series Signal Generators SCPI Command Reference 167
System Commands
System Subsystem (:SYSTem)
:FILesystem:STORage:TYPE:AUTO
Supported All Models
:SYSTem:FILesystem:STORage:TYPE:AUTO ON|OFF|1|0
:SYSTem:FILesystem:STORage:TYPE:AUTO?
This command enables the signal generator to auto–detect when the USB media is connected. When
AUTO (ON|1) is selected, the file system uses the USB media, if available. When the USB media is
removed, the file system uses the internal media. For more information, refer to the signal
generator’s softkey Help. For more information on non–volatile storage media settings, refer to
:FILesystem:STORage:EXTernal, :FILesystem:STORage:EXTernal:PATH and :FILesystem:STORage:TYPE
commands.
*RST 1
Key Entry Storage Type Int Ext Auto
Example
:SYST:FIL:STOR:TYPE:AUTO ON
The preceding example selects AUTOmatic as the non–volatile storage setting and the signal generator
will detect if the external USB port has a memory storage device connected.
Remarks When the USB media is removed, the USB non–volatile user file system effectively
does not exist.
:IDN
Supported All Models
:SYSTem:IDN "string"
This command modifies the identification string that the *IDN? query returns. Sending an empty
string sets the query output of *IDN? to its factory shipped setting. The maximum string length is 72
characters.
Remarks Modification of the *IDN? query output enables the signal generator to identify
itself as another signal generator when used as a replacement.
The display diagnostic information, shown by pressing the
Diagnostic Info softkey, is not affected by this command.
:LANGuage
Supported All
:SYSTem:LANGuage
"SCPI"|"COMP"|"8648"|"E4428C"|"E4438C"|"E8257D"|"E8267D"|"E8663B"|"E8247C"|"E8257C"|"
E8267C"|"N5181A|"N5182A"|"E442XB"|"E443XB"|"E8241A"|"E8244A"|"E8251A"|"E8254A"|"SMU20
0A"|"SMATE200A"|"SMJ100A"|"SMIQ"|"SML"|"SMV"|"SMR"|"SMF100A"|"MG3691B"|"MG3692B"|"MG3
693B"|"MG3694B"|"3410"|"8360"|"8371"|"83732"|"83752"|"8340"|"8644"|"8662"|"8663"|"866
4"|"8665"
:SYSTem:LANGuage?
This command sets the remote language for the signal generator.
To Next Page
Loading...
Need help?
General
