Agilent X-Series Signal Generators SCPI Command Reference 309
Arb Commands
Dual ARB Subsystem–N5172B/82B ([:SOURce]:RADio:ARB)
"SEQ:filename" This variable names a sequence file residing in the catalog of sequence files. For
more information on the file name syntax, see “File Name Variables” on page 13.
Example
:RAD:ARB:WAV:NHE "Test_Data"
The preceding example selects the file Test_Data, without applying header settings.
:WAVeform:SEGMents
Supported N5172B/82B
[:SOURce]:RADio:ARB:WAVeform:SEGMents?
This command returns the segment count in the currently selected waveform sequence for Dual Arb.
[:STATe]
Supported N5172B/82B
[:SOURce]:RADio:ARB[:STATe] ON|OFF|1|0
[:SOURce]:RADio:ARB[:STATe]?
This command enables or disables the arbitrary waveform generator function.
The Dual ARB Player provides a status register to show the status of the following items:
• Dual ARB state (off or on)
•Trigger arming
• Waveform play–back
• Multiple BBG synchronization
To use the register, see “:REGister[:STATus]” on page 297.
*RST 0
Key Entry ARB Off On
To Next Page
Loading...