Agilent X-Series Signal Generators SCPI Command Reference 189
System Commands
Trigger Subsystem
:TRIGger:EXTernal:SOURce
Supported All
:TRIGger:EXTernal:SOURce TRIGger[1]|TRIGger2|PULSe
:TRIGger:EXTernal:SOURce?
This command selects the external trigger source. With external triggering, the selected bi- directional
BNC is configured as an input.
TRIGger1 This choice selects the TRIG 1 BNC as the external trigger source for triggering
sweep, point and function generator sweeps.
TRIGger2 This choice selects the TRIG 2 BNC as the external trigger source for triggering
sweep, point and function generator sweeps.
PULSe This choice selects the PULSE BNC as the external trigger source for triggering
sweep, point and function generator sweeps.
Example
:TRIG:EXT:SOUR PULS
The preceding example sets the external trigger source to the PULSE BNC.
*RST TRIGger1
:TRIGger:INTernal:SOURce
Supported All
:TRIGger:INTernal:SOURce PVIDeo|PSYNc
:TRIGger:INTernal:SOURce?
This command selects the internal trigger source.
PVIDeo This choice selects Pulse Video as the internal trigger source for triggering sweep,
point and function generator sweeps.
PSYNc This choice selects Pulse Sync as the internal trigger source for triggering sweep,
point and function generator sweeps.
Example
:TRIG:INT:SOUR PVID
The preceding example sets the internal trigger source to Pulse Video.
*RST PSYN
Key Entry Trigger 1 Trigger 2 Pulse
Key Entry Pulse Video Pulse Sync
To Next Page
Loading...
Need help?
General
