Agilent X-Series Signal Generators SCPI Command Reference 119
System Commands
Memory Subsystem (:MEMory)
Remarks Refer to File Name Variables for information on the file name syntax.
:CATalog:LIST?
Supported All Models
:MEMory:CATalog:LIST?
This query outputs a list of the list sweep files. The return data will be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name>,<file type>,<file size>"
Example Output
1818624,519962624,"LAST,LIST,122","LIST10,LIST,69"
Key Entry List
Remarks Refer to “File Name Variables” on page 13 for information on the file name syntax.
:CATalog:MDMod
Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:MDMod?
This command outputs a list of the arbitrary waveform multi carrier digital modulation files. The
return data will be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name,file type,file size>"
Key Entry MDMOD
Remarks Refer to “File Name Variables” on page 13 for information on the file name syntax.
:CATalog:MTONe
Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:MTONe?
This command outputs a list of the arbitrary waveform multitone files. The return data will be in the
following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name,file type,file size>"
To Next Page
Loading...
Need help?
General
