120 Agilent X-Series Signal Generators SCPI Command Reference
System Commands
Memory Subsystem (:MEMory)
Key Entry MTONE
Remarks Refer to “File Name Variables” on page 13 for information on the file name syntax.
:CATalog:PTRain?
Supported All with Option 320 and either UNU or UNW
:MEMory:CATalog:PTRain?
This command lists all files of the pulse train files stored in the non- volatile storage.
:CATalog:SEQ?
Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:SEQ?
This query outputs a list of the arbitrary waveform sequence files. The return data will be in the
following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name>,<file type>,<file size>"
Example Output
1818624,519962624,"SEQ1_TEST,SEQ,206","SEQ_TEST,SEQ,169"
Key Entry SEQ
Remarks Refer to “File Name Variables” on page 13 for information on the file name syntax.
:CATalog:SHAPe
Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:SHAPe?
This command outputs a list of the burst shape files. The return data will be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name,file type,file size>"
Key Entry SHAPE
Remarks
Refer to “File Name Variables” on page 13 for information on the file name syntax.
:CATalog:STATe?
Supported All Models
To Next Page
Loading...
Need help?
General
