Agilent Technologies N5171B

198 Agilent X-Series Signal Generators SCPI Command Reference
Analog Modulation Commands
Amplitude Modulation Subsystem–Option UNT ([:SOURce])
*RST 0.000 rad
:AM[1]|2:INTernal:DUAL:FUNCtion[1]|2:FREQuency
Supported All Models with Options UNT and 303
[:SOURce]:AM[1]|2:INTernal:DUAL:FUNCtion[1]|2:FREQuency <value><unit>
[:SOURce]:AM[1]|2:INTernal:DUAL:FUNCtion[1]|2:FREQuency?
Sets the frequency of tone 1 (default) or tone 2 of the internal dual function generator source.
*RST 400.0 Hz
:AM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe
Supported All Models with Options UNT and 303
[:SOURce]:AM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe SINE|TRIangle|SQUare|RAMP
[:SOURce]:AM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe?
This command sets the shape of tone 1 (default) or tone 2 of the internal dual function generator
source.
*RST SINE
:AM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe:RAMP
Supported All Models with Options UNT and 303
[:SOURce]:AM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe:RAMP POSitive|NEGative
[:SOURce]:AM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe:RAMP?
This command sets the ramp direction of the selected tone (1 or 2) of the internal dual function
generator source when :AM[1]|2:INTernal:DUAL:FUNCtion[1]|2:SHAPe is set to RAMP.
*RST POS
Range - 6.290 to 6.290 rad
- 360.4 to 360.4 deg
Key Entry AM Tone 2 Phase Offset
Range 100.0 mHz to 6.25 MHz
Key Entry AM Tone 1 F r eq AM Ton e 2 F r e q
Key Entry AM Tone 1 Waveform AM Tone 2 Waveform
Key Entry Pos Ramp Neg Ramp