172 Agilent X-Series Signal Generators SCPI Command Reference
System Commands
System Subsystem (:SYSTem)
:LICense:LIST
Supported All Models
:SYSTem:LICense:LIST?
This query provides a listing of the current licenses installed on the signal generator.
:LICense:REMove
Supported All Models
:SYSTem:LICense:REMove <license_line>
This command removes a single license line.
Example
To remove a license line:
:SYST:LIC:REM "FEATURE 403 aspk 0 permanent 0 389D66FB107E9B02
HOSTID=N5182B,US00000068"
The preceding example removes a license "FEATURE 403 aspk 0 permanent 0 389D66FB107E9B02
HOSTID=N5182B,US00000068", from the signal generator.
Remarks To remove multiple license lines: Repeat the process for removing a single license
for each license line to be removed.
:LOG:SCPI ON/OFF/1/0
Supported All Models
:SYSTem:LOG:SCPI ON|OFF|1|0
This command toggles the state of SCPI logging. When toggled ON, a copy of every subsequent SCPI
command executed will be placed in the log.
Toggling the state to OFF suspends the logging, and toggling back to ON resumes the logging. Pressing
the front- panel Clear SCPI Log softkey will clear the log.
Remarks This log information is stored in a file the BIN directory called SCPI_LOG.TXT.
You can use FTP to download the file from the instrument.
:OPT
Supported All Models
:SYSTem:OPT "string"
This command modifies the option string that the *OPT? query returns. Sending an empty string sets
the query output of *OPT? to its factory shipped setting. The maximum string length is 72 characters.
Remarks Modification of the *OPT? query output enables the signal generator, with a set of
options, to identify itself as another signal generator when used as a replacement
The display diagnostic information, shown by pressing the
Diagnostic Info softkey, is not affected by this command.
To Next Page
Loading...
Need help?
General
