Agilent Technologies N5171B User Manual

376 Agilent X-Series Signal Generators SCPI Command Reference
Real–Time Commands
AWGN Real–Time Subsystem–Option 403 ([:SOURce]:RADio:AWGN:RT)
AWGN Real–Time Subsystem–Option 403 ([:SOURce]:RADio:AWGN:RT)
:BWIDth
Supported N5172B/82B with Option 403
[:SOURce]:RADio:AWGN:RT:BANDwidth|BWIDth <value>
[:SOURce]:RADio:AWGN:RT:BANDwidth|BWIDth?
This command adjusts the flat bandwidth of the real–time AWGN waveform.
The variable <value> is expressed in units of Hertz (Hz–MHz).
*RST +1.00000000E+006
Key Entry Bandwidth
:CBWidth
Supported N5172B/82B with Option 403
[:SOURce]:RADio:AWGN:RT:CBWidth <value>
[:SOURce]:RADio:AWGN:RT:CBWidth?
This command sets the channel bandwidth, or the portion of the bandwidth specified by the
bandwidth ratio.
The variable <value> is expressed in units of Hertz (Hz–MHz).
*RST +1.00000000E+006
Range 1 to the Option 65x maximum bandwidth, not to exceed the flat noise bandwidth
Key Entry Bandwidth
:IQ:MODulation:ATTen
Supported N5172B/82B with Option 403
[:SOURce]:RADio:AWGN:RT:IQ:MODulation:ATTen <value>
[:SOURce]:RADio:AWGN:RT:IQ:MODulation:ATTen?
This command attenuates the I/Q signals being modulated through the signal generator’s RF path.
The variable <value> is expressed in units of decibels (dB).
*RST Varies (instrument dependent)
Range 0 to 50
Key Entry Modulator Atten Manual Auto
Range Option 653 1 Hz to 60 MHz
Option 655 1 Hz to 120 MHz
Option 656 1 Hz to 80 MHz
Option 657 1 Hz to 160 MHz

Agilent Technologies N5171B Specifications

General

Brand	Agilent Technologies
Model	N5171B
Category	Computer Hardware
Language	English