Agilent X-Series Signal Generators SCPI Command Reference 409
Real–Time Commands
Phase Noise Subsystem–Option 432 ([SOURce:RADio:PHASe:NOISe)
*RST 0
Key Entry Phase Noise Off On
Key Path Mode > More 2 of 2 > Real-Time Phase Noise Impairment > Phase Noise Off On
:TRACe?
Supported N5172B/82B with Option 432
[:SOURce]:RADio:PHASe:NOISe:TRACe? <startFreq>,<stopFreq>,<numSamples>
This query returns the theoretical phase noise amplitude mask applied with the current settings if
the phase noise feature is on. This mask does not take the natural phase noise of the instrument into
account, only the impairment from the phase noise feature. The output is over the start frequency to
the stop frequency for the number of samples specified. The samples are taken at logarithmic
frequency steps and the output is in dBc/Hz.
Range <startFreq> 1 Hz to 100 MHz
<stopFreq> 1 Hz to 100 MHz
<numSamples> 1 to 8192
To Next Page
Loading...
Need help?
General
