Agilent Technologies N5171B User Manual

166 Agilent X-Series Signal Generators SCPI Command Reference
System Commands
System Subsystem (:SYSTem)
Remarks When reading and writing files from or to the USB media, different memory
subsystem file types are marked by having a particular extender on the filename.
Refer to “USB Media Path Options” table on page 166.
Files with unrecognized extenders are treated as binary (.bin) files.
:FILesystem:STORage:TYPE
Supported All Models
:SYSTem:FILesystem:STORage:TYPE INTernal|EXTernal
:SYSTem:FILesystem:STORage:TYPE?
This command selects the non–volatile storage location on the signal generator. For more information
on non–volatile storage media settings, refer to :FILesystem:STORage:EXTernal,
:FILesystem:STORage:EXTernal:PATH and :FILesystem:STORage:TYPE:AUTO commands.
Key Entry Storage Type Int Ext Auto
Example
:SYST:FIL:STOR:TYPE EXT
The preceding example selects the external USB port as the location for non–volatile file storage on
the signal generator.
USB Media
Path Options
Extender File Type Memory Subsystem
.waveform waveform NVWFM
.markers waveform marker NVMKR
.header waveform header NVHDR
.state instrument state STATE
.list list sweep LIST
.userflat user flatness USERFLAT
.seq waveform sequence SEQ
All others All others BIN

Agilent Technologies N5171B Specifications

General

Brand	Agilent Technologies
Model	N5171B
Category	Computer Hardware
Language	English