164 Agilent X-Series Signal Generators SCPI Command Reference
System Commands
System Subsystem (:SYSTem)
System Subsystem (:SYSTem)
:CAPability
Supported All Models
:SYSTem:CAPability?
This query returns the signal generator’s capabilities and outputs the appropriate specifiers:
(RFSOURCE WITH((AM|FM|PULM|PM)&(FSSWEEP|FLIST)&(PSSWEEP|PLIST) &TRIGGER&REFERENCE))
This is a list of the SCPI–defined basic functionality of the signal generator and the additional
capabilities it has in parallel (a&b) and singularly (a|b).
:DATE
Supported All Models
:SYSTem:DATe <year>,<month>,<day>
:SYSTem:DATe?
This command sets the date as shown in the lower right area of the signal generator display.
<year> This variable requires a four digit integer.
The query returns the date in the following format:
<+year>, <+month>, <+day>
Key Entry Time/Date
:ERRor:CODE[:NEXt]
Supported All Models
:SYSTem:ERRor:CODE[:NEXt]?
This query returns the next error message number from the signal generator SCPI error queue. If
there are no error messages, the query returns the following output:
+0
When there is more than one error message, the query will need to be sent for each message.
The Agilent MXG deletes the error messages from the front- panel error queue after viewing the last
message.
Range <month>: 1 to 12 <day>: 1 to 31
Key Entry Error Info View Next Error Message
To Next Page
Loading...
Need help?
General
