Agilent X-Series Signal Generators SCPI Command Reference 19
2 Basic Function Commands
This chapter provides SCPI descriptions for subsystems dedicated to signal generator operations
common to most MXG and EXG X-Series signal generators.
This chapter contains the following major sections:
• Correction Subsystem ([:SOURce]:CORRection) on page 20
• Digital Modulation Subsystem—N5172B/82B ([:SOURce]) on page 26
• Frequency Subsystem ([:SOURce]) on page 39
• List/Sweep Subsystem ([:SOURce]) on page 50
• Marker Subsystem–N5173B/83B ([:SOURce]) on page 63
• Power Subsystem ([:SOURce]:POWer) on page 66
• Vector Modulation Subsystem—N5172B/82B ([:SOURce]:IQ) on page 83
To Next Page
Loading...