Agilent Technologies N5171B

Agilent X-Series Signal Generators SCPI Command Reference 247
5 Arb Commands
This chapter provides arb signal generation SCPI command descriptions for use in either component
or receiver test using X- Series signal generator and EXG X- series vector signal generators.
This chapter contains the following major sections:
• All Subsystem–N5172B/82B ([:SOURce]) on page 247
• Dmodulation Subsystem–N5172B/82B with Option 431 ([:SOURce]:RADio:DMODulation:ARB) on
page 248
• Dual ARB Subsystem–N5172B/82B ([:SOURce]:RADio:ARB) on page 273
• LARB Subsystem–N5172B/82B ([:SOURce]:RADio:LARB) on page 310
• Multitone Subsystem–N5172B/82B ([:SOURce]:RADio:MTONe:ARB) on page 311
• Two Tone Subsystem–N5172B/82B ([:SOURce]:RADio:TTONe:ARB) on page 328
All Subsystem–N5172B/82B ([:SOURce])
:RADio:ALL:OFF
Supported N5172B/82B
[:SOURce]:RADio:ALL:OFF
This command turns off all digital modulation formats.
Remarks This command does not affect analog modulation.