Agilent X-Series Signal Generators SCPI Command Reference 375
7 Real–Time Commands
This chapter provides real–time signal generation SCPI command descriptions for use in either
component or receiver test using Agilent X- Series vector signal generators.
This chapter contains the following major sections:
• All Subsystem–N5172B/82B ([:SOURce]) on page 375
• AWGN Real–Time Subsystem–Option 403 ([:SOURce]:RADio:AWGN:RT) on page 376
• Custom Subsystem–Option 431([:SOURce]:RADio:CUSTom) on page 379
• Phase Noise Subsystem–Option 432 ([SOURce:RADio:PHASe:NOISe) on page 407
All Subsystem–N5172B/82B ([:SOURce])
:RADio:ALL:OFF
Supported N5172B/82B
[:SOURce]:RADio:ALL:OFF
This command turns off all digital modulation formats.
Remarks This command does not affect analog modulation.
To Next Page
Loading...