Agilent Technologies N5171B User Manual

Agilent X-Series Signal Generators SCPI Command Reference 117
System Commands
Memory Subsystem (:MEMory)
Memory Subsystem (:MEMory)
:CATalog:BINary?
Supported All Models
:MEMory:CATalog:BINary?
This query outputs a list of the binary files. The return data will be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name>,<file type>,<file size>"
Example Output
1818624,519962624,"GEN_FILE11,BIN,5"
Key Entry Binary
Remarks Refer to “File Name Variables” on page 13 for information on the file name syntax.
:CATalog:BIT
Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:BIT?
This command outputs a list of the bit files. The return data will be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name,file type,file size>"
Key Entry Bit
Remarks
Refer to “File Name Variables” on page 13 for information on the file name syntax.
:CATalog:DMOD
Supported N5172B with Option 653 or 655, N5182B with Option 656 or 657
:MEMory:CATalog:DMOD?
This command outputs a list of the arbitrary waveform digital modulation files. The return data will
be in the following form:
<mem used>,<mem free>,"<file listing>"
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the directory list. Each file listing parameter will be in the following form:
"<file name,file type,file size>"

Agilent Technologies N5171B Specifications

General

Brand	Agilent Technologies
Model	N5171B
Category	Computer Hardware
Language	English