Agilent Technologies N5171B

Agilent X-Series Signal Generators SCPI Command Reference 177
System Commands
System Subsystem (:SYSTem)
:PMETer[1]|2:SENSe:AVERage[:STATe]
Supported All Models
:SYSTem:PMETer[1]|2:SENSe:AVERage[:STATe] ON|OFF|1|0
:SYSTem:PMETer[1]|2:SENSe:AVERage[:STATe]?
This command enables or disables averaging for Channel A or B. The query returns the state of
averaging.
Key Entry Averaging Mode
:PMETer[1]|2:SENSe:FREQuency[:CW|:FIXed]
Supported All Models
:SYSTem:PMETer[1]|2:SENSe:FREQuency[:CW|:FIXed] <freq><unit>
:SYSTem:PMETer[1]|2:SENSe:FREQuency[:CW|:FIXed]?
This command sets channel frequency for channel A or B. The query returns the value.
Key Entry Channel Frequency
Default 50 MHz
:PMETer[1]|2:UNIT:POWer
Supported All Models
:SYSTem:PMETer[1]|2:UNIT:POWer DBM|W
:SYSTem:PMETer[1]|2:UNIT:POWer?
This command selects the power measurement units for Channel A or B. The query returns that
value.
Key Entry Measurement Units dBm W
:PMETer[1]|2[:STATe]
Supported All Models
:SYSTem:PMETer[1]|2[:STATe] ON|OFF|1|0
:SYSTem:PMETer[1]|2[:STATe]?
This command enables or disables the power meter measurements for channel A or B.
Key Entry Averaging Mode > Off