Agilent Technologies N5171B User Manual

56 Agilent X-Series Signal Generators SCPI Command Reference
Basic Function Commands
List/Sweep Subsystem ([:SOURce])
*RST TRIGger1
:LIST:TRIGger:INTernal:SOURce
Supported All Models
:LIST:TRIGger:INTernal:SOURce PVIDeo|PSYNc
:LIST:TRIGger:INTernal:SOURce?
This command selects the internal trigger source.
PVIDeo This choice selects Pulse Video as the internal trigger source for triggering sweep,
point and function generator sweeps.
PSYNc This choice selects Pulse Sync as the internal trigger source for triggering sweep,
point and function generator sweeps.
Example
:LIST:TRIG:INT:SOUR PVID
The preceding example sets the internal trigger source to Pulse Video.
*RST PSYN
:LIST:TRIGger:SLOPe
Supported All Models
:LIST:TRIGger:SLOPe POSitive|NEGative
:LIST:TRIGger:SLOPe?
This command sets the polarity of an external signal at the TRIG 1, TRIG 2, or PULSE BNC (see
:LIST:TRIGger:EXTernal:SOURce) or internal Pulse Video or Pulse Sync signal (see
:LIST:TRIGger:INTernal:SOURce) that will trigger a list or step sweep.
POSitive The signal generator triggers an event when it detects a rising edge on the source
signal
NEGative The signal generator triggers an event when it detects a falling edge on the source
signal
*RST POS
Key Entry Int/Ext Trigger Polarity Neg Pos
:LIST:TRIGger:SOURce
Supported All Models
[:SOURce]:LIST:TRIGger:SOURce BUS|IMMediate|EXTernal|INTernal|KEY|TIMer|MANual
[:SOURce]:LIST:TRIGger:SOURce?
Key Entry Trigger 1 Trigger 2 Pulse
Key Entry Pulse Video Pulse Sync

Agilent Technologies N5171B Specifications

General

Brand	Agilent Technologies
Model	N5171B
Category	Computer Hardware
Language	English