Agilent Technologies N5171B

Agilent X-Series Signal Generators SCPI Command Reference 25
Basic Function Commands
Correction Subsystem ([:SOURce]:CORRection)
:PMETer:COMMunicate:USB:LIST?
Supported All Models
[:SOURce]:CORRection:PMETer:COMMunicate:USB:LIST?
The query returns a listing of all connected USB devices.
Key Entry USB Device
Remarks The setting enabled by this command is not affected by signal generator power–on,
preset, or *RST.
[:STATe]
Supported All Models
[:SOURce]:CORRection[:STATe] ON|OFF|1|0
[:SOURce]:CORRection[:STATe]?
This command enables or disables the user–flatness corrections.
*RST 0
Key Entry Flatness Off On