Agilent Technologies N5171B User Manual

152 Agilent X-Series Signal Generators SCPI Command Reference
System Commands
Route Subsystem (:ROUTe)
*RST NONE
Key Entry Route to Trig 1 BNC
[:CONNectors]:TRIGger[2]:OUTPut
Supported As indicated
:ROUTe[:CONNectors]:TRIGger[2]:OUTPut
SWEep|SRUN|SETTled|PVIDeo|PSYNc|LXI|PULSe|TRIGger1|SFDone|NONE
:ROUTe[:CONNectors]:TRIGger[2]:OUTPut?
This command selects a signal to be routed to the rear panel TRIG 2 connector.
SWEep This choice routes the sweep trigger out signal to the TRIG 2 connector.
SETTled This choice routes the source settled signal to the TRIG 2 connector.
PVIDeo This choice routes the pulse video signal to the TRIG 2 connector.
PSYNc This choice routes the pulse sync signal to the TRIG 2 connector.
LXI This choice routes the LXI signal to the TRIG2 connector.
PULSe This choice routes the pulse sync signal to the TRIG 2 connector.
TRIGger1 This choice routes the TRIG 1 BNC signal to the TRIG 2 connector.
SFDone This choice routes the swept function done signal (the pulse at the end of each
full swept function) to the TRIG 2 connector.
NONE This choice routes no signal to the TRIG 2 connector.
*RST SWE
Key Entry Route to Trig 2 BNC

Agilent Technologies N5171B Specifications

General

Brand	Agilent Technologies
Model	N5171B
Category	Computer Hardware
Language	English